Serving Ottawa & Online since 1962 Contact Us

Burners & Elements

Products


  • Anvil Burner

    Anvil Burner

    The Anvil Brewing Equipment burner is powerful, quiet, efficient, and fast! You’ll love the multiple height operation, rust-free precision cast burner, ultra-high temp coating, and the integral heat shielding to protect your valve and thermometer. 45,000 BTU/Hr.
    CA$159.99
     
  • Banjo Burner 10" replacement Burner

    Banjo Burner 10" replacement Burner

    Replacement burner for the Bayou Classic's Banjo Cooker. High Pressure Cast Iron.
    CA$69.99
     
  • Banjo Cooker 16", 30psi Kab4

    Banjo Cooker 16", 30psi Kab4

    Designed for Large Pots Up to 100 Qt, (minimum 14" diameter pot), 16" Cooking Surface, 12.5" Tall Welded Steel Frame, 10" Cast Iron BG14 Burner, 48" Stainless Steel Braided Hose, 0 30 PSI Adjustable Regulator, 360 WindScreen Protection. 210,000 BTU's
    CA$134.99
     
  • Bayou Burner with hose guard 22", 30psi Kab6

    Bayou Burner with hose guard 22", 30psi Kab6

    The Banjo Burner Plus has a 22 inch wide cooking surface allowing this awesome propane burner capable of supporting up to an 162 quart stock pot. The most effective, fastest heating propane burner on the market. Simmer a small pan by turning Burner's flame down to a small flame or TURN IT UP to a kick butt flame to heat a huge pot in no time! The Burner includes sturdy legs, a regulator kit and hose guard. It can heat a 100 quart pot in just 15 minutes! This propane burner kicks out super high BTUs which are a result from a combination of the high pressure regulator and large 10 inch cast iron element. 210,000 BTU.
    CA$159.99
     
  • Bayou Double Jet 18", 30psi-SP2

    Bayou Double Jet 18", 30psi-SP2

    The 18 inch width of the cooking surface SP2 DOUBLE JET COOKER capable of supporting up to 162 quart stock pots. The SP2 double jet propane cooker heats up large boiling pots twice as fast as other propane burners. Includes a new protective hose guard, a 48 inch LPG Stainless Steel Braided hose and a 0-30 psi adjustable regulator. 18inch Diameter Cooking Surface. 12.5" Welded Steel Frame. 48" LPG Stainless Steel Braided Hose. 0-30 PSI Adjustable Regulator with Hose Guard. Designed to Safely Support Cooking Pots up to 162 Quarts. 210,000 BTU'S.
    CA$99.99
     
  • Blichmann  HellFire Floor Burner

    Blichmann HellFire Floor Burner

    Efficient, fast, and versatile. This dual mode capability burner is unlike anything else on the market and is sure to satisfy all your heating needs. This custom made burner is tuned to operate in high efficiency mode, and also in a second high power mode. In the high power mode, you'll be amazed with 140,000BTU/hr output for blazing fast heating. Waiting for a boil is now a thing of the past. In the high efficiency mode, you'll get 80,000 BTU/hr and superb heat transfer to the wort and whisper quiet operation. Plenty of power to keep a rolling boil on a 20 gal batch of beer. To top off all that power we include a patent pending heat shield to keep that massive power off your valve and thermometer and direct it to your wort. Simple operation - just crank up the gas and adjust the damper for more power! A nice clean burn where the flames do not lift off the nozzles. Heat transfer to the wort is effective and amazingly quiet. If you're in a big hurry crank up the gas and open the damper to let more air in - not as efficient or quiet but is super fast! 140,000 BTU/hr in high power mode, 80,000 BTU/hr in efficiency mode. Clip-on heat shield keeps that massive amount of heat off your valve and thermometer and directs it to your wort. Infinitely adjustable kettle retaining bars accomodates kettles up to 19.75" in diameter. Non-rusting, fume free heavy gauge stainless frame. Excellent outdoor flame stability (not suitable for indoor use)
    CA$209.99
     
  • Blichmann HellFire Natural Gas Conv kit

    Blichmann HellFire Natural Gas Conv kit

    Convert your Blichmann HellFire Burner to natural gas. (You must supply your own piping for natural gas). This reduces output from 72,000 BTU/hr to 60,000 BTU/hr, and is not for indoor usage. For HellFire floor Burner only
    CA$18.99
     
  • Brewing Element Lock Nut 1" NPS

    Brewing Element Lock Nut 1" NPS

    1" NPS Stainless Steel locknut. Straight threaded. Fits 1" Electric Brewing Element Thread. Fits Camco Brewing Elements Model #'s 2929, 2955, 2935, 2965.
    CA$10.99
     
  • Camco Brewing Element 4500W 240V foldback 2929

    Camco Brewing Element 4500W 240V foldback 2929

    4500W (240V), straight, low watt density (LWD), 10.375" long from flange base to tip (9.875" long from end of threads). Stainless steel base, Sheath Material: Alloy 840 (highly corrosion resistant), Bushing Material: 303 Stainless Steel, UL Listed for U.S. and Canada. The stainless steel bushing resist rusting better than traditional zinc or nickel plated steel bushings. Includes gasket. What’s the difference between the Ultra-Low Watt Density (ULWD) and Low Watt Density (LWD)...The ULDW element prevents the wort from being scorched or caramelized as the heat output is only 50W per square inch (7.8W per square cm) or less. ULWD also provides added safety as the element will not break instantaneously if fired "dry" (not immersed in water) by accident. The ULWD elements are best to be used whenever possible instead of LWD, especially when the element is in contact with wort. The high performance nickel-chromium 804 stainless steel alloy sheath (tube) used on these elements provides additional strength to resist dry firing. WARNING HIGH VOLTAGE & CURRENT.Incorrect installation of these elements can result in injury or death. DeFalco’s does not take responsibility for any user error resulting in injury or accident of any kind. DeFalco’s highly recommends you consult and have an electrician to install the elements properly...this product may not be for you.
    CA$31.99
     
  • Camco Brewing Element 4500W 240V Ripple 2955

    Camco Brewing Element 4500W 240V Ripple 2955

    4500W (240V), ripple, ultra-low watt density (ULWD). 13.7" long from flange base to tip. For kettles approximately 13.5" in diameter or larger. Stainless steel base, Sheath Material: Alloy 840 (highly corrosion resistant), Bushing Material: 303 Stainless Steel, UL Listed for U.S. and Canada. The stainless steel bushing resist rusting better than traditional zinc or nickel plated steel bushings. Includes gasket. What’s the difference between the Ultra-Low Watt Density (ULWD) and Low Watt Density (LWD)...The ULDW element prevents the wort from being scorched or caramelized as the heat output is only 50W per square inch (7.8W per square cm) or less. ULWD also provides added safety as the element will not break instantaneously if fired "dry" (not immersed in water) by accident. The ULWD elements are best to be used whenever possible instead of LWD, especially when the element is in contact with wort. The high performance nickel-chromium 804 stainless steel alloy sheath (tube) used on these elements provides additional strength to resist dry firing. WARNING HIGH VOLTAGE & CURRENT.Incorrect installation of these elements can result in injury or death. DeFalco’s does not take responsibility for any user error resulting in injury or accident of any kind. DeFalco’s highly recommends you consult and have an electrician to install the elements properly...this product may not be for you.
    CA$49.99
     
  • Camco Brewing Element 5500W 240V foldback 2935

    Camco Brewing Element 5500W 240V foldback 2935

    5500W (240V), straight, low watt density (LWD), 12.25" long from flange base to tip (11.875" long from end of threads). Stainless steel base, Sheath Material: Alloy 840 (highly corrosion resistant), Bushing Material: 303 Stainless Steel, UL Listed for U.S. and Canada. The stainless steel bushing resist rusting better than traditional zinc or nickel plated steel bushings. Includes gasket. What’s the difference between the Ultra-Low Watt Density (ULWD) and Low Watt Density (LWD)...The ULDW element prevents the wort from being scorched or caramelized as the heat output is only 50W per square inch (7.8W per square cm) or less. ULWD also provides added safety as the element will not break instantaneously if fired "dry" (not immersed in water) by accident. The ULWD elements are best to be used whenever possible instead of LWD, especially when the element is in contact with wort. The high performance nickel-chromium 804 stainless steel alloy sheath (tube) used on these elements provides additional strength to resist dry firing. WARNING HIGH VOLTAGE & CURRENT.Incorrect installation of these elements can result in injury or death. DeFalco’s does not take responsibility for any user error resulting in injury or accident of any kind. DeFalco’s highly recommends you consult and have an electrician to install the elements properly...this product may not be for you.
    CA$33.99
     
  • Camco Brewing Element 5500W 240V Ripple 2965

    Camco Brewing Element 5500W 240V Ripple 2965

    5500W (240V), ripple, ultra-low watt density (ULWD). 13.7" long from flange base to tip. For kettles approximately 13.5" in diameter or larger. Stainless steel base, Sheath Material: Alloy 840 (highly corrosion resistant), Bushing Material: 303 Stainless Steel, UL Listed for U.S. and Canada. The stainless steel bushing resist rusting better than traditional zinc or nickel plated steel bushings. Includes gasket. What’s the difference between the Ultra-Low Watt Density (ULWD) and Low Watt Density (LWD)...The ULDW element prevents the wort from being scorched or caramelized as the heat output is only 50W per square inch (7.8W per square cm) or less. ULWD also provides added safety as the element will not break instantaneously if fired "dry" (not immersed in water) by accident. The ULWD elements are best to be used whenever possible instead of LWD, especially when the element is in contact with wort. The high performance nickel-chromium 804 stainless steel alloy sheath (tube) used on these elements provides additional strength to resist dry firing. WARNING HIGH VOLTAGE & CURRENT.Incorrect installation of these elements can result in injury or death. DeFalco’s does not take responsibility for any user error resulting in injury or accident of any kind. DeFalco’s highly recommends you consult and have an electrician to install the elements properly...this product may not be for you.
    CA$41.99
     

Categories

Latest News

May

29

2017

SALE ITEMS

Sale Items

SALE ITEMS
While Supplies Last

BUSINESS HOURS
Mon, Tues, Wed 9-6
Thurs, Fri 9-8 Sat 9-5

Shop in person at any one of our stores!
2030 Lanthier Drive, Orleans ON K4A 3V5 613-590-9946
435 Moodie Drive, Nepean ON K2H 8A5 613-721-9945
957 Gladstone Avenue, Ottawa ON K1Y 3E5 613-722-9945

Click here to view our Sale Items Online!

GET YOUR FREE DEFALCO VINTAGE CUSTOMER CARD
Earn points with every purchase to spend on your favourite HOME brewing and winemaking supplies.

NEW
MAKE YOUR OWN CRAFT BEER KIT or CIDER KIT
Beer Styles…Pale Ale, Stout, Brown Ale, Blonde Lager, Pilsner, Draught, Amber Ale
Cider Styles…Apple, Pear, Mixed Berry, Spiced Apple, Strawberry Lime, Blueberry
Produces 23L
$16.29-29.99 – Reg. $18.99-34.99

19L ITALIAN GLASS CARBOYS
$25.99 Reg. $29.99

MUNTONS CONNOISSEUR BEER KITS 1.8KG
Export Stout, IPA Bitter, Pilsner, Continental Lager, Nut Brown Ale, Traditional Bitter, Wheat Beer, Yorkshire Bitter
$17.59 Reg. $21.99

MOUNTMELLICK BEER KITS 1.8KG
Cream Ale, Stout
$18.99 Reg. $23.99

BREWMAKER BEER KITS 1.8KG
IPA, Lager, Northern Ale, Pilsner Lager, Strong Export, Victorian Bitter, Yorkshire Bitter, Premium Cider
$17.59 Reg. $21.99

MAKE YOUR BEER AND WINE AT HOME
with a …
Combination Beer/Winemaking
EQUIPMENT KIT
Only $78.00 Reg. $86.00
(Beer/Wine Style not included)
Kit includes:
29L Plastic pail and lid, 23L Glass Carboy, Siphoning Equipment, Sanitizer, Funnel, Airlock and Stopper, Stirring Paddle, Thermometer, Hydrometer & Test Jar, Detailed Instructions.

            THE GRAINFATHER ALL-IN-ONE BEER BREWING SYSTEM
The system allows you to mash at high extract efficiency by utilizing a pump for easy recirculating of the wort through the mashing process. The grain bed is then easily raised out of the kettle to provide for sparging and draining of the grains. Your mash tun then becomes an electric boil kettle. The mash temperature and boil are all controlled precisely with an electric heating element. The system comes with a digital temperature controller so you can adjust temperature of your mash with-in a degree. This allows for step mashing.  This whole 8 gallon system is extremely compact so it makes for easy indoor or outdoor brewing.  Another added feature is the brewing system can also double as a reflux or pot still. All you need to do is attach the appropriate reflux or pot still top which is also available.
$999.99 Reg. $1,159.99

YOU CAN MAKE ANY OF THE WINE STYLES FEATURED BELOW AT OUR PLACE FOR AN ADDITIONAL $32
(Includes: Filtered water, degassing, filtering, shrink caps, corks)

CRU INTERNATIONAL 5WK KITS
California Chardonnay, Shiraz & Cabernet Merlot, Ontario Sauvignon Blanc, South African Chenin Blanc  
$4-5 OFF Reg. $77.99-83.99

CELLAR CRAFT SHOWCASE 6WK KITS
Argentina Malbec, California Old Vine Zinfandel, Italian Rosso Fortissimo, Yakima Cabernet Shiraz, Gewurztraminer Riesling & Viognier
$10-12 OFF Reg. $131.99-143.99

NIAGARA MIST - 4WK KITS         
Strawberry White Zinfandel, Raspberry Merlot, Peach Chardonnay, Pear Pinot Grigio, Tropical Riesling
$5 OFF Reg. $58.99

GRAND CRU 4WK KITS
Bergamais, Rosso Superiore, Sangiovese Merlot, Valpola, Liebfraumilch, Pinot Blanc, Sauvignon Blanc
$4-5 OFF Reg. $60.99-69.99

CRU SELECT 6WK KITS
Argentinean Trio White (Viognier/Riesling/Chardonnay), Australian Chardonnay, Italian Rosso Grande & Valpola, French Merlot,
$8-10 OFF Reg. $104.99 – 110.99

MAKE YOUR WINE AT OUR
3 Easy Steps
1. Choose your wine style
2. Mix the ingredients
3. Bottle and Enjoy
Take advantage of our on-premise EVERYDAY LOW PRICES.
(All on-premise promotions yield 28-30_750ml bottles per batch and includes $32 fee, filtered water, degassing, filtering, shrink caps, corks)

CALIFORNIA CONNOISSEUR 4WK KITS
California White, Chardonnay, Liebfraumilch, Sauvignon Blanc, Nebbiolo, Merlot, Shiraz, Vieux Château Du Roi, White Zinfandel
$65.99-81.99

EUROPEAN SELECT 4WK KITS
Chardonnay, Sauvignon Blanc, Soave, Verdicchio, Nebbiolo, Bergamais, Sangiovese, Pinot Noir, Valpolicella, Vieux Château Du Roi
$84.99-90.99

ON-PREMISE WINEMAKING SUPER SPECIALS
$7-9 OFF

KENRIDGE CLASSIC 4WK KITS
KenRidge Classic contains 10 L of the highest quality varietal grape juices and premium concentrates producing outstanding wines with distinctive flavours, bouquet and character.
Chardonnay, Pinot Grigio, Sauvignon Blanc Cabernet Sauvignon, Merlot, Pinot Noir
$90.99-98.99* Reg. $97.99-107.99
* Yield 28-30_750ml bottles per batch and includes, filtered water, degassing, filtering, shrink caps, corks

NIAGARA MIST 4WK KITS
A unique and refreshing alternative to traditional wine coolers and lighter table wines. Light, cool and crisp. Balanced with a bold refreshing bouquet and flavour of fresh fruits. Makes 23L of refreshing, low alcohol (7% target) wine beverage.
Strawberry White Zinfandel, Raspberry Merlot, Peach Chardonnay, Pear Pinot Grigio, Tropical Riesling
$82.99 Reg. $90.99
* Yield 28-30_750ml bottles per batch and includes, filtered water, degassing, filtering, shrink caps, corks

 

 


All News Subscribe